Skip to main content

Chestnut Associates

We keep the heart of your business safe

Call us today on 07770 302504  |  Email  |  FREE 30min Consultation

Chestnut Associates

We keep the heart of your business safe

Call us today on 07770 302504  |  Email  |  FREE 30min Consultation

Welcome to Chestnut Associates. If you already have a account then please login, if not then why not register.

What is a risk assessment?

By Joanne Hunt
Friday, September 25, 2020

“What is a risk assessment?”

This is a question I get asked many times. It is a very important question as every workplace will need to carry these assessments out and many will have to document them.

What is a risk assessment?

The HSE’s definition of a risk assessment is:

“….a careful examination of what, in your work, could cause harm to people, so that you can weigh up whether  you have taken enough precautions or should do more to prevent harm….”

A risk assessment is an important part of your health and safety management and its main objective is to determine the measures required to comply with statutory duty under the Health and Safety at Work Act 1974 and associated regulations by reducing the level of incidents/accidents.

Why do a risk assessment?

A risk assessment will protect your staff and your business, as well as complying with law. As for when to do a risk assessment it should simply be conducted before you or any other employees conduct some work which presents a risk of injury or ill-health.

A person within your company needs to attend risk assessment training as it will ensure that this person is competent within your organisation and will gain abilities such as hazard identification, ability to categorise and evaluate risk(s). These abilities will allow a ‘suitable and sufficient’ risk assessment to be conducted within your own organisation.

How to do a risk assessment

There are no fixed rules on how a risk assessment should be carried out, but there are a few general principles that should be followed.

Five steps to risk assessment can be followed to ensure that your risk assessment is carried out correctly, these five steps are:

  1. Identify the hazards
  2. Decide who might be harmed and how
  3. Evaluate the risks and decide on control measures
  4. Record your findings and implement them
  5. Review your assessment and update if necessary

Step 1: Identify the hazards

In order to identify hazards you need to understand the difference between a ‘hazard’ and ‘risk’. A hazard is ‘something with the potential to cause harm’ and a risk is ‘the likelihood of that potential harm being realised’.

Hazards can be identified by using a number of different techniques such as walking round the workplace, or asking your employees.

Step 2: Decide who might be harmed and how

Once you have identified a number of hazards you need to understand who might be harmed and how, such as ‘people working in the warehouse’, or members of the public.

Step 3: Evaluate the risks and decide on control measures

After ‘identifying the hazards’ and ‘deciding who might be harmed and how’ you are then required to protect the people from harm. The hazards can either be removed completely or the risks controlled so that the injury is unlikely.

Step 4: Document your findings

Your findings should be written down it’s a legal requirement where there are 5 or more employees; and by recording the findings it shows that you have identified the hazards, decided who could be harmed and how, and also shows how you plan to eliminate the risks and hazards.

Step 5: Review your assessment and update as and when necessary

This needs to be carried out at least annually or when the system changes such as some ne equipment etc. You should never forget that few workplaces stay the same and as a result this risk assessment should be reviewed and updated when required.

As with every part of Health & Safety – Joanne Hunt from Chestnut Associates can support you. Please contact her on joanne@chestnutassociates.co.uk

Return to index